Took a few pics of the valve that came with my project in anticipation of cleaning and reinstalling it. Later found out it didn't fit the bracket that was on the frame. 
Figured the pics might help someone planning to remove and rebuilt theirs.
The first four were as it was being disassembled, the last pic is of the parts after they were cleaned. As I recall, there is only one seal which keeps fuel from leaking out where the stem goes through the nut that keeps it all together.
Figured the pics might help someone planning to remove and rebuilt theirs.The first four were as it was being disassembled, the last pic is of the parts after they were cleaned. As I recall, there is only one seal which keeps fuel from leaking out where the stem goes through the nut that keeps it all together.